obsah košíku
ceník ke stažení
|
| ||||||||||||||||||||||||||
Quality made in germany.
The motor identification chip that is built in the motor includes all relevant data for the motor and sends the motor temperature to the Master Senstrol ESC. Furthermore, the chip contains certain security parameters for use in your model. Many of these data can be modified to suit individual needs, but some are fixed for safe operation.
Use this F3A Senstrol Motor only with the Master Senstrol ESC.
Specifications:
Powerange: max. 2800W (15 sec.)
Idle Current @ 8,4V: 0,9A
Resistance (Ri): 0,025 Ohm
RPM/Volt (kv): 209 U/min-1
Weight: 528g
Diameter: 88,5 mm
Length: 69 mm
recom. Speedcontroler Master Senstrol 120
recom. Timing: due ID Chip
Switching Frequenzy: due ID Chip
| Specifiactions | |
| max. power range [W] (max.15 sec.) | 2800 |
| Poles | 28 |
| Turns | 14 |
| Idle current (I0) at 8.4V [A] | 0,9 |
| Internal resistance (Ri) [Ohm] | 0,025 |
| Recommended timing [°] | durch ID Chip vorgegeben |
| Switching Frequenzy [kHz] | durch ID Chip vorgegeben |
| Controller recommendation [A] (depending on setup) | Master Senstrol 120 |
| Idle speed per volt (kv) | 209 |
| Dimensions and weight | |
| Weight [g] | 528 |
| Length [mm]/[in] | 69 |
| Outer diameter [mm]/[in] | 88,5 |
| Shaft diameter [mm]/[in] | 8 |
| Delivery contents | |
| Prop Adapter | Ja |
| Mounting cross | Nein |
| Gold plug mm (soldered) | 4 |
| Backmount mountable | Nein |
| Front mountable | Ja |
