obsah košíku
ceník ke stažení
|
| ||||||||||||||||||||||||||||
Product description and features
The hacker R & D team around the developer Martin Vilsmeier has once again achieved a big hit with this new Q80-11 PSD!
Especially for the new requirements in the F3A aerobatics this Q80-11 PSD was developed in close cooperation with our team pilots.
The "P" stands for "Performance" by an uncompromising revision has succeeded in further improving the weight-performance ratio. The overall length has shrunk to the size of the Q80-XS.
Also the internal resistance has been reduced again which makes the whole drive more efficient and increases the possible power throughput.
Like every Q80 also this Q80-11 PSD is built, tested and measured by hand in-house.
Quality "Made in Germany" for the highest demands.
Specifications
| Power range | max. 3200W (15 sec.) |
|---|---|
| Idle Current @ 8.4V | 1.1A |
| Resistance (Ri) | 0.02 Ohm |
| RPM/Volt (kv) | 205 U/min-1 |
| Weight | 620g |
| Outer diameter | 88.5mm |
| Length | 65.5mm |
| Number of poles | 28 |
| Controller recommondation | MasterSpin 99 Opto |
| Timing recommondation | 25° |
| Switching frequency | 8kHz |
Typical setups
| Prop | Xoar CFK 21x13 | Mejzlik 20x14EL 3Bl. | Falcon 20x13,5 3Bl. |
|---|---|---|---|
| V / LiPo | 37V = 10S LiPo | 37V = 10S LiPo | 37V = 10S LiPo |
| Amp. | 74A | 89A | 84A |
| Power | 2738W | 3293W | 3108W |
| RPM | 6150 | 5910 | 6030 |
| Controller | Master Spin 99-Opto | Master Spin 99-Opto | Master Spin 99-Opto |
| Timing | 25° | 25° | 25° |
| Specifiactions | |
| max. power range [W] (max.15 sec.) | 3200 |
| Poles | 28 |
| Turns | 11 |
| Idle current (I0) at 8.4V [A] | 1,1 |
| Internal resistance (Ri) [Ohm] | 0,02 |
| Recommended timing [°] | 25 |
| Switching Frequenzy [kHz] | 8 |
| Controller recommendation [A] (depending on setup) | 99 - 125 |
| Idle speed per volt (kv) | 205 |
| Dimensions and weight | |
| Weight [g] | 620 |
| Length [mm]/[in] | 65,5 |
| Outer diameter [mm]/[in] | 88,5 |
| Shaft diameter [mm]/[in] | 8 |
| Delivery contents | |
| Prop Adapter | Ja |
| Mounting cross | Nein |
| Gold plug mm (soldered) | 4 |
| Backmount mountable | Nein |
| Front mountable | Ja |
