|
|
Product description and features
The Glider motor fits seamlessly into our range of sail noses/FES drives. Due to the shaft extension with integrated support bearing, this drive can also be installed in slim sail noses. The shaft can be easily moved by loosening the three M3 screws on the back. The model can be converted to a glider in no time. It is possible to switch between electric flight and glider towing. The shaft has a diameter of 6 mm, for the use of the usual prop drivers and scalespinners.
This weight-optimised high-end motor with a weight of only 503g fits perfectly in large glider models Ventus 2CX, 6m wingspan, 11.5kg to approx. 15kg
Accessories
You will find suitable controllers, batteries and a suitable propeller in the accessories tab.
Scope of delivery
1x A50-12 L-Glider kv355 and manual.
Drive recommendation
A50-12 L-Glider kv355 | ||||||
---|---|---|---|---|---|---|
Item no.: 97826833 | ||||||
Propeller | RFM 18,5x10 | RFM 13x10 | ||||
Model kg | 11,5 | 15 | ||||
LiPo | 6S | 8S | ||||
Voltage [V] | 22,2 | 29,6 | ||||
Current [A] | 60 | 55 | ||||
Power [W] | 1332 | 1628 | ||||
RPM | 6549 | 9544 | ||||
Controller [A] | 70-80 | 70-80 | ||||
Timing [°] | 20-25 | 20-25 |
Specifiactions | |
max. power range [W] (max.15 sec.) | 1650 |
Poles | 14 |
Turns | 12 |
Idle current (I0) at 8.4V [A] | 1,5 |
Internal resistance (Ri) [Ohm] | 0,021 |
Recommended timing [°] | 20 - 25 |
Switching Frequenzy [kHz] | 8 |
Controller recommendation [A] (depending on setup) | 70 |
Idle speed per volt (kv) | 355 |
Dimensions and weight | |
Weight [g] | 503 |
Length [mm]/[in] | 120,5 |
Outer diameter [mm]/[in] | 58 |
Shaft diameter [mm]/[in] | 6 |
Delivery contents | |
Prop Adapter | Nein |
Mounting cross | Ja |
Gold plug mm (recommended) | 4 |
Backmount mountable | Nein |
Front mountable | Ja |